← Lab / 03

Machine cycle explorer

Why is the machine waiting? Follow the sequence, inspect the signals, and rewind the evidence.

Built in one shot by GPT6-Astra in about 12 minutes.

Opening the cycle explorer…

About the model

A deterministic 100 ms simulation of one fictional load, clamp, align, process, inspect, and unload cycle. Output requests and plant feedback are separate. Camera acceptance uses an illustrative 30 µm residual threshold. The path and movements are schematic; this is neither machine control nor a safety implementation.

Three injected faults demonstrate a missing sensor acknowledgement, a completed but rejected measurement, and a failed actuator. A lost clamp or shutter permissive during processing stops laser enable and requires a new part. Pre-process failures allow an explicit retry after the injected cause is cleared and the shutter is confirmed closed. Reset starts a fresh simulated machine and discards the current recording.

History is an immutable sequence of snapshots and events. Scrubbing pauses simulation; historical views cannot issue commands. Return to live before operating. Exports are diagnostic JSON; there is no network connection, persistent storage, or automatic hardware integration. Recordings are bounded to about five minutes of simulated operation.